|
|
 |
BELL HP3 HELMET
The Bell HP3 is the first helmet to meet the FIA8860 standard and has been designed through close collaboration with leading F1 drivers and teams. The HP3 features an ultra-lightweight all carbon shell and an advanced energy absorbing liner system. The helmet has a front lip to provide aerodynamic stability and purpose designed top and chin bar vents to maximize airflow inside the helmet. The helmet is certified to the Snell SA2005 and FIA 8860 standards. The HP3 is available in an all carbon finish in sizes 6 3/4 to 7 3/8 plus. The helmet comes equipped with Hans Clips, a double screen anti fog visor and fleece lined helmet bag. A top spoiler and various gurney flaps are available as accessory equipment.
Price: 3,600.00 |
|
 |
BELL GP2 HELMET
The GP2 combines advanced F1 styling, full helmet ventilation and aerodynamic performance. The GP2 features a lightweight carbon / Kevlar composite shell and a high-tech energy absorbing liner system. The GP2 is available in white in sizes 6 3/4 to 7 3/4. The helmet comes pre-drilled for Hans and is certified to the Snell SA2005 standard and is approved for use with Hans. The GP2 comes with the SE3 SRV double screen visor. A top spoiler and various gurney flaps are available as accessory equipment.
Price: 620.00 |
|
 |
BELL KC3 HELMET
The Bell KC3 is the first helmet certified to the CMR youth standard, developed jointly by the FIA Institute and the Snell memorial Foundation. The CMR helmet standard is designed for young racing drivers competing in various forms of racing at lower speeds who are often too small to support the extra size and weight associated with adult helmets. The KC3 design features a lightweight carbon / Kevlar composite shell, aerodynamic features and full ventilation. The helmet is available in white in sizes 6 3/4 to 7 3/8. The helmet is CMR 2007 approved.
Price: 560.00 |
|
 |
BELL DOMINATOR HELMET
Dominator, the next generation in aerodynamic helmets, delivers stability at high-speeds in a compact, comfortable, ultra-lightweight package. Designed and tested with the involvement of racing's best drivers, it is the helmet of choice for all forms of open wheel and kart racing. Dominator's features built in trip strips, rear wicker and front spoiler combine to deliver outstanding aerodynamic performance. Bell also makes a Sprint Car version of the Dominator that does not have forehead vents or chin bar vents to prevent dust and dirt from entering the helmet.
In addition, the Dominator features our new SRV friction shield system*. This new system has a slide mechanism that allows the driver to adjust the tension on the shield allowing for multiple opening positions. When properly adjusted and in the locked position, the SRV system helps reduce the possibility of the shield opening during an impact.
* Sizes 7 1/8 through 7 3/4, built after September 26, 2006, are equipped with an SRV friction shield system.
Price: 875.00 |
|
 |
BELL T-6 INTERCEPTOR HELMET
New for 2007, the T-6 Interceptor is Bell's latest development for high speed forms of racing. The T6 was used exclusively by Bell's Indy Car drivers in 2006, including 2005 Indy Car and Indy 500 Champion Dan Wheldon, 2 time Indy 500 winner Helio Castroneves, 2005 Indy Car and Indy 500 Rookie of The Year Danica Patrick and 2006 Indy Car and Indy 500 Rookie of The Year Marco Andretti, and was introduced at the 2006 Indy 500. The ultra lightweight T6 features a V-Top configuration to help accelerate airflow and eliminate buffeting and lift at high speeds. The helmet also features a rear wicker that improves helmet stability. The innovative front vents are designed to collect airflow and redirect it through internal vent channels to eliminate shield fogging.
Price: 975.00 |
|
 |
BELL VORTEX TFA HELMET
The Vortex Top Forced Air features a pipe on the top of the helmet that channels airflow from an external system and circulates it around the top of the head to reduce heat and increase cooling and onto the front of the shield to prevent fogging. The Vortex Top Forced Air is based on our lightweight Vortex and has been perfected through testing with top Nextel Cup drivers. Locating the pipe on the top of the helmet instead of the side allows for increased driver head movement because the pipe does not interfere with the protective head surround of the latest safety seats.
Air Bladder Technology -
The Vortex Top Forced Air features an air bladder top pad with micro ventilation holes that not only accelerate airflow but evenly disperse it around the driver's head for maximum comfort and cooling.
Price: 765.00 |
|
 |
BELL INFUSION TFA HELMET
Over the past two years, Bell has conducted extensive prototype and track testing with our top professional NASCAR drivers to improve airflow, ventilation and cooling in high temperature environments. The Infusion uses Bell's Air Chamber technology to create pressurized chambers inside the helmet to help accelerate and route airflow for maximum ventilation. The Infusion is offered in a left side air and right side air version. Airflow is directed to the front of the face. The Infusion will be used extensively in NASCAR and Sports Car competition in 2007.
Air Chamber Technology
- The Infusion Side Forced Air features an air chamber system designed to increase pressure and accelerate airflow into a sealed chamber in the front of the helmet maximizing ventilation and cooling
.
Price: 775.00 |
|
|
BELL FRONT WING, FRONT VENT, & REAR WING
Accessories for the new Bell helmets.
Rear Wing Price:
97.50
Top Vent Price:
37.50
Front Wing Price:
37.50
|
|
 |
BELL CHROME VISORS
Adding a colored chrome visor from Bell is a cheap way to enhance the appearance of your design. They are available in regular and fog free applications.
Price: 55.00 (Blue Chrome, Gold Chrome, Silver Chrome)
Price: 75.00 (Fog Blue Chrome, Gold Chrome, Silver Chrome) |
|
 |
BELL ANODIZED HELMET SCREWS
Bell's anodized shield
screws can be used to match
your helmet's paint job or
your shield. The kit comes
with two pivot screws and
two SRV screws.
Price:
10.00
(Silver, Red, Blue, Gold, Green) |
|
 |
BELL HELMET BACKPACK
Bell's helmet backpack allows you to carry your helmet with you on the go. The bag features a helmet compartment in the bottom of the bag and a
separate
storage area above. It can
also be divided into two
bags. The backpack has five
external storage
compartments and is lined
for easy cleaning. It also
has impact absorbing foam on
the inside of the bag for
maximum protection. The bag
is 12' wide, 9' deep and 21'
tall. The helmet bag section
is 12' tall.
Price: 34.95 (Available in
Red/Black) |
 |
|
